
The AirTAC SE63 Standard Cylinder SE63X650S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 650mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X650S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It provides a robust 1559 N push force at 0.5 MPa and utilizes a PT3/8 port paired with a 36 mm adjustable air cushion to smooth out high-velocity strokes.
Because this variant includes the -S magnet, it is fully compatible with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The square extruded aluminum barrel omits external tie rods, delivering a clean, corrosion-resistant exterior that mounts flush within confined machine frames.
| Model | Airtac SE63 Standard Cylinder SE63X650S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to index heavy timber pallets along a 650 mm stroke length on an automated packaging line.
Uses the built-in magnet for DMSE sensors to confirm machine guard positions, opening the safety chuck door across a 650 mm span.
Drives a 650 mm plunger stroke to inject precise chemical volumes, relying on the adjustable cushion to prevent liquid splash at high speeds.
Selecting this 63 mm bore makes sense when a 50 mm cylinder (982 N push) lacks the power to move a load but an 80 mm bore (2513 N push) would physically overpower the assembly and waste air. The 650 mm stroke is a standard option, yet at this length the 20 mm piston rod experiences higher bending moments under lateral stress, so an external guide is recommended to prevent premature rod-bearing wear.
If the application requires the load to stay fixed mid-stroke or during a complete air loss, remember that the adjustable cushion only decelerates the piston near the end caps and does not act as a mechanical lock—consider a BSE rod-lock variant for fail-safe holding. For dimensionally interchangeable ISO 15552 retrofits, match the 63 mm bore, 650 mm stroke, PT3/8 port, and the required mounting accessory.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force reaches 2182 N. The absolute maximum push force is 318 kgf at 1.0 MPa.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting interface, making it a direct replacement for other standard profile cylinders. Just ensure your existing hardware matches the PT3/8 port and M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.