
The AirTAC SE63 Standard Cylinder SE63X700 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X700 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Featuring a 63 mm bore and a 700 mm stroke, this unit operates efficiently between 30-800 mm/s using a PT3/8 port.
Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant profile that simplifies flush mounting. The field-adjustable pneumatic cushioning at both ends allows you to tune end-stop deceleration for heavy loads. Note that this specific SKU lacks a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X700 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushing filled cardboard cases onto a palletizer queue, utilizing the 1559 N push force and 700 mm stroke to span conveyor widths efficiently.
Positioning sheet metal backstops on a CNC press brake, where the 700 mm stroke provides deep throat reach and the ISO 15552 body mounts cleanly to the machine frame.
Rejecting oversized logs on a cut-off saw line, requiring the full 700 mm extension to push heavy timber blocks clear of the main conveyor path.
Stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore raises it to 2513 N. This 63 mm model hits a solid middle ground for 1559 N thrust. Because this is a standard 700 mm stroke within the 1500 mm maximum for this bore, it is readily available. At 700 mm, the unsupported piston rod is highly susceptible to bending under side loads; always use an external guide to prevent premature bearing wear. Remember, a plain SE cylinder drifts when air is lost—the adjustable cushion only decelerates the piston near stroke end and does not lock the load. For position holding, explore the BSE rod lock variant.
Quick checklist
The SE63X700 generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It features a PT3/8 port and a 36 mm cushion length.
Yes, the SE63X700 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and footprint as other ISO 15552 profile cylinders. You can swap it in as a direct replacement using your existing mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.