verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X700S

The AirTAC SE63 Standard Cylinder SE63X700S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke700 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$176.77 $184.27Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X700S

The AirTAC SE63X700S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa and a maximum of 318 kgf at 1.0 MPa. Driven by filtered air through a PT3/8 port, it operates at speeds between 30 and 800 mm/s. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting environmental contamination.

This 700 mm stroke variant includes a built-in magnet (-S) designed to trigger AirTAC CMSE reed and DMSE electronic position sensors housed within the three lateral sensor grooves. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed cycling.

Airtac SE63 Standard Cylinder SE63X700S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X700S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke700 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X700S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X700S Is Used

conveyor_belt

Pallet Transfer Line Diverter

Uses the 700 mm stroke to extend and reroute heavy pallets across a conveyor belt, relying on the 1559 N push force to overcome friction without stalling.

straighten

Automotive Press Ejector

Ejects formed sheet metal panels from a hydraulic press bed, utilizing the adjustable air cushion to gently decelerate the rod before it strikes the end cap.

science

Textile Dyeing Beam Loader

Pushes heavy textile beams into a dyeing chamber, where the no-tie-rod extruded barrel prevents chemical and moisture buildup along the cylinder body.

Is the Airtac SE63 Standard Cylinder SE63X700S the Right Cylinder?

This 63 mm bore generates 1559 N push at 0.5 MPa; if your assembly requires less force, the 50 mm bore offers 982 N push, while stepping up to the 80 mm bore provides 2513 N push for heavier payloads. Because the 700 mm stroke is substantial, the Ø20 mm rod and bearing are subjected to bending moments under side loads—an external guide rail is strongly recommended to prevent premature seal wear and piston drift. As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a direct replacement for other ISO 15552 profile cylinders, sharing identical mounting and PT3/8 port dimensions. Note that a plain SE cylinder does not hold its position when air is exhausted; use a BSE rod lock for fail-safe load holding.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X700S FAQ

The SE63X700S has a 63 mm bore and a 700 mm stroke. At 0.5 MPa it provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa the push force is 2182 N, and the maximum rated push force is 318 kgf at 1.0 MPa.

Yes, the SE63X700S is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting footprints and rod-end thread (M16x1.5) with other profile cylinders of the same bore. The built-in magnet also allows seamless integration with AirTAC CMSE and DMSE sensor switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X700S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X700S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.