
The AirTAC SE63 Standard Cylinder SE63X70S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 70mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X70S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Driven through a PT3/8 port, it cycles a 70 mm stroke using a 20 mm hard-chrome rod.
Built with a square extruded aluminum barrel that eliminates external tie rods, this body style resists corrosion and mounts flush against machine frames. The integrated -S magnet allows precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors housed neatly within the body's multiple sensor grooves.
| Model | Airtac SE63 Standard Cylinder SE63X70S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing gates on a beverage conveyor, utilizing the 1559 N push force to swiftly shift heavy crate traffic at 30-800 mm/s.
Drives the mechanical arms that tuck corrugated flaps prior to hot-melt sealing, relying on the 70 mm stroke for rapid cycling.
Positions the backgauge stop on a sheet metal brake, where the magnetic piston triggers DMSE sensors for repeatable 0.5 mm accuracy.
Selecting this 63 mm bore yields 1559 N push at 0.5 MPa. If your payload is lighter, the 50 mm bore offers 982 N push, while heavier setups might require the 80 mm bore providing 2513 N push. For direct retrofits, match the 63 mm bore, 70 mm stroke, PT3/8 port, and your specific mounting accessory.
Because this is a standard double-acting cylinder, it will drift if air pressure drops or the valve centers; use a BSE rod lock if the mechanism must hold a vertical load safely. Field-adjustable air cushions at both ends let you tune end-of-stroke deceleration to prevent hard mechanical impacts.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, it provides 1559 N push and 1402 N pull. At 0.7 MPa, push increases to 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X70S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and port sizes of comparable profile cylinders from other manufacturers.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.