
The AirTAC SE63 Standard Cylinder SE63X75S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 75mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X75S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized mounting interfaces on multiple sides.
This 63 mm bore unit includes a built-in magnet (-S) designed to trigger AirTAC CMSE reed and DMSE electronic sensors via integrated side grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration for a 75 mm stroke, protecting tooling during high-cycling operations.
| Model | Airtac SE63 Standard Cylinder SE63X75S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates diverter arms on packaging lines to reroute heavy pallets, utilizing the 1559 N push force to overcome carton friction at 75 mm stroke.
Drives the indexing mechanism on machining centers to swap lathe tool turrets, relying on the -S magnet to confirm tool locked positions via DMSE sensors.
Folds and secures corrugated cardboard flaps on case erector stations, where the 36 mm cushion length absorbs the repetitive impact of 75 mm rapid strokes.
Select this 63 mm bore when a 50 mm cylinder (982 N push @0.5 MPa) is underpowered, but an 80 mm bore (2513 N push @0.5 MPa) would physically overwhelm your tooling or consume excessive space. The SE63X75S provides a balanced 1559 N output for mid-range actuation.
Because it adheres to ISO 15552 dimensions, this cylinder functions as a direct replacement for other ISO 15552 profile cylinders without requiring custom bracketry. Note that the adjustable air cushion only decelerates the piston near the end of travel; if your application must hold a vertical load without live air pressure, the plain SE cylinder will drift, and you should pivot to the BSE rod-lock variant instead.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X75S generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE63X75S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, reusing your existing mounting hardware and PT3/8 pneumatic ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.