verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X770S

The AirTAC SE63 Standard Cylinder SE63X770S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 770mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke770 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$192.12 $199.62Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X770S

The AirTAC SE63X770S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding automation tasks. At 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, scaling to a maximum of 318 kgf at 1.0 MPa. The 770 mm stroke is driven through a PT3/8 port, moving a Ø20 mm hard-chrome rod at speeds between 30 and 800 mm/s.

Unlike traditional tie-rod designs, its extruded aluminum barrel lacks external hardware, offering a compact, flush-mounting body that resists corrosion and simplifies sensor placement. The integrated -S magnet directly supports AirTAC CMSE reed and DMSE electronic switches for precise end-of-stroke detection. Furthermore, field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-stop deceleration, softening impacts during high-speed operations.

Airtac SE63 Standard Cylinder SE63X770S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X770S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke770 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X770S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×770Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X770S Is Used

conveyor_belt

Pallet Transfer Line Diverter

Utilizes the 770 mm stroke to extend and redirect heavy pallets between parallel conveyor belts, relying on the 1559 N push force to overcome inertia.

precision_manufacturing

CNC Lathe Bar Feeder

Pushes raw metal bar stock through the spindle guide bushing, using the integrated magnet and DMSE sensor to confirm material delivery.

packaging

Large Carton Flap Folder

Deploys the long stroke to fold oversized corrugated carton flaps, adjusting the pneumatic cushion to soften the impact at full extension.

Is the Airtac SE63 Standard Cylinder SE63X770S the Right Cylinder?

To size this actuator accurately, consider stepping down to the 50 mm bore if your application requires less energy, as it provides 982 N of push at 0.5 MPa. Conversely, if your load demands greater thrust, stepping up to the 80 mm bore yields 2513 N of push at 0.5 MPa. Because this 770 mm stroke creates a long unsupported rod length, side loads can induce severe rod-bearing bending; always utilize an external guide to prevent premature seal wear and binding. As a true ISO 15552 profile cylinder, the SE63X770S serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, matching the 63 mm bore, 770 mm stroke, PT3/8 port, and standard mounting accessories. Note that this standard SE variant will drift if air pressure is lost; if your process requires absolute position holding without live pressure, explore the BSE rod-lock series instead.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X770S FAQ

The SE63X770S provides 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE63X770S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, retaining the same mounting interface, 63 mm bore, 770 mm stroke, and PT3/8 port dimensions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X770S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X770S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.