verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X800S

The AirTAC SE63 Standard Cylinder SE63X800S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke800 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$192.12 $199.62Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X800S

The AirTAC SE63X800S is a double-acting single-rod profile cylinder built to the ISO 15552 dimension standard, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while freeing up three integrated sensor grooves for flexible positioning.

Because this 800 mm stroke unit carries the -S option, it features a built-in magnet ready for AirTAC CMSE reed and DMSE electronic solid-state switches. Field-adjustable pneumatic cushioning at both ends allows you to precisely tune end-of-stroke deceleration, protecting long-travel payloads from harsh mechanical impacts.

Airtac SE63 Standard Cylinder SE63X800S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X800S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke800 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X800S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X800S Is Used

straighten

Long-Travel Ejector

Pushes completed machined aluminum parts out of a CNC machining center using the full 800 mm stroke, relying on the 1559 N output to clear the work envelope reliably.

conveyor_belt

Pallet Transfer Arm

Actuates a transfer mechanism between roller conveyors on a packaging line, utilizing the 36 mm adjustable cushion to soften stops at high traverse speeds.

sync_alt

Multi-Stage Diverter

Sorts heavy totes on a distribution conveyor by extending fully across the lane, using the integrated magnet to trigger DMSE sensors for position confirmation.

Is the Airtac SE63 Standard Cylinder SE63X800S the Right Cylinder?

Generating 1559 N of push at 0.5 MPa, this 63 mm bore sits perfectly between the 50 mm (982 N) and 80 mm (2513 N) options. If your load demands less force, the 50 mm bore saves space and air consumption; if you need to move heavier assemblies, the 80 mm bore provides the next step up in thrust.

At an 800 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads, so an external linear guide is strongly recommended to prevent premature rod-bearing wear. Remember that the adjustable air cushion only decelerates the piston near the end of travel; it cannot hold a load vertically if air pressure drops. For position holding, pair this cylinder with a BSE rod lock or an external pilot-operated check valve. For an ISO 15552 retrofit, match the 63 mm bore, 800 mm stroke, PT3/8 port, and your required mounting accessory.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X800S FAQ

This 63 mm bore cylinder delivers 1559 N push and 1402 pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The 800 mm stroke falls within the standard maximum standard stroke limit of 1500 mm for this bore size.

Yes, the SE63X800S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, PT3/8 port size, and M16x1.5 rod thread of other standardized profile cylinders, allowing a direct retrofit.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X800S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X800S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.