
The AirTAC SE63 Standard Cylinder SE63X80S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X80S is a double-acting, single-rod ISO 15552 profile cylinder delivering a robust 1559 N push force at 0.5 MPa. Its extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a setscrew, softening impacts during high-speed 30-800 mm/s operations. This 63 mm bore utilizes a PT3/8 port and a 20 mm hard-chrome rod, making it dimensionally interchangeable with other ISO 15552 cylinders for seamless retrofits.
| Model | Airtac SE63 Standard Cylinder SE63X80S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to reliably fold and seal corrugated cardboard flaps at 80 mm stroke in high-speed packaging lines.
Actuates heavy redirect gates on conveyor systems, using its adjustable cushioning to prevent jarring stops that could destabilize palletized goods.
Secures mid-sized aluminum castings inside machining centers, leveraging the -S magnet to confirm clamp engagement before the cycle initiates.
Stepping down to the 50 mm bore reduces the 0.5 MPa push to 982 N, while moving up to the 80 mm bore increases it to 2513 N, allowing you to scale thrust precisely to your payload. Because this is a standard double-acting cylinder, it cannot hold a load unpowered—piston drift will occur if air is lost, requiring a BSE rod lock for fail-safe holding. For ISO 15552 replacement matching, verify the 80 mm stroke, PT3/8 port, mounting accessory, and the -S magnet requirement.
Quick checklist
The SE63X80S generates 1559 N push and 1402 N pull at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa.
Yes, the SE63X80S is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting footprint and pin dimensions with comparable ISO 15552 profile cylinders from other manufacturers.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.