
The AirTAC SE63 Standard Cylinder SE63X80SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X80SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous industrial motion control. Operating at 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, making it well-suited for medium-duty positioning and actuation tasks.
This model incorporates a built-in magnet (-S) for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel eliminates external tie rods, resulting in a compact, corrosion-resistant profile that mounts flush, while the field-adjustable air cushions at both ends allow you to fine-tune end-of-stroke deceleration for smooth operation.
| Model | Airtac SE63 Standard Cylinder SE63X80SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Delivers the precise 1559 N push force required to cleanly fold heavy corrugated cardboard flaps on high-speed packaging lines without stalling.
Utilizes the FTC trunnion mount to swing a diverting arm smoothly across a conveyor belt, redirecting heavy product flows at 30-800 mm/s.
Provides reliable 1402 N pull force to secure aluminum castings inside a CNC machining center, with DMSE sensors confirming clamp engagement.
When sizing this 63 mm bore actuator, evaluate your force margin: the 50 mm bore yields 982 N push at 0.5 MPa, while the 80 mm bore steps up to 2513 N. If your system requires holding a load vertically without continuous air pressure, note that this standard SE cylinder will drift, and a BSE rod lock variant is required for secure positioning. The FTC center trunnion mounting provides a pivoting anchor point ideal for articulating mechanisms. For this 80 mm stroke, the 20 mm rod and M16x1.5 thread handle moderate side loads, though external guides remain essential for rigid linear motion.
Quick checklist
This 63 mm bore cylinder features a PT3/8 port and delivers 1559 N push at 0.5 MPa, 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push force of 318 kgf at 1.0 MPa.
Yes, the SE63X80SFTC is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing setups using the same mounting hardware, and the adjustable cushioning screws allow you to fine-tune end-stop deceleration to match your previous setup.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.