
The AirTAC SE63 Standard Cylinder SE63X80SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X80SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding industrial motion control. Delivering 1559 N of push force at 0.5 MPa and equipped with an 80 mm stroke, it provides robust actuation for mid-sized machinery. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight equipment envelopes while resisting contaminant buildup.
This specific configuration incorporates an NBR seal for reliable pneumatic operation in standard temperature environments and includes a built-in magnet for position sensing. The magnet seamlessly interfaces with AirTAC CMSE reed and DMSE electronic switches, which drop directly into the sensor grooves machined into three sides of the cylinder body. Furthermore, the field-adjustable pneumatic cushioning at both stroke ends allows technicians to precisely tune end-of-stroke deceleration, protecting payloads from hard mechanical impacts.
| Model | Airtac SE63 Standard Cylinder SE63X80SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates the pusher carriage to index raw bar stock into the spindle collet, utilizing the 1559 N thrust to overcome guide friction and the 80 mm stroke for precise material positioning.
Drives the mechanical arms that fold corrugated box flaps prior to adhesive application, where the adjustable end cushions soften the stroke to prevent tearing the paperboard.
Extends a routing gate to sort heavy wooden pallets on a roller conveyor, relying on the NBR seals for longevity in dusty warehouse environments.
Selecting the SE63X80SN means evaluating your required force against neighboring bore sizes. If 1559 N of push at 0.5 MPa is excessive for your payload, stepping down to the 50 mm bore yields 982 N, saving space and air consumption. Conversely, if your load demands greater thrust, stepping up to the 80 mm bore provides 2513 N. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the directional valve is centered; applications requiring absolute load holding without live pressure must integrate an external rod lock or a pilot-operated check valve.
As a true ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to seamlessly swap it into existing footprints without altering mounting hardware. It utilizes a PT3/8 port, a Ø20 mm piston rod with an M16x1.5 thread, and features the -S magnet for CMSE/DMSE sensor integration.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X80SN provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X80SN is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for matching ISO mounting interfaces. The included -S magnet allows you to mount AirTAC CMSE reed or DMSE electronic sensors directly into the barrel grooves for end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.