
The AirTAC SE63 Standard Cylinder SE63X85 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 85mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X85 is a double-acting, single-rod ISO 15552 profile cylinder delivering 1559 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This 63mm bore unit includes field-adjustable air cushioning at both ends to soften hard end-stops at speed. Note that this specific SKU lacks the built-in magnet option, so it is not wired for CMSE or DMSE position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X85 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push and 85mm travel needed to sharply fold corrugated cardboard flaps on high-speed packaging lines.
Actuates a routing gate to redirect heavy wooden pallets between merging conveyor tracks without stalling.
Secures aluminum engine blocks inside a machining center, using its 36mm cushion length to absorb rapid retraction impacts.
Generating 1559 N push at 0.5 MPa, this 63mm bore fits medium-duty workflows. If you need less force, the 50mm bore offers 982 N push; if scaling up, the 80mm bore provides 2513 N push. As a standard double-acting cylinder, it will drift if air is lost—use a BSE rod lock for fail-safe holding. Because it shares the ISO 15552 interface, it serves as a direct replacement for other ISO 15552 cylinders using identical mounting hardware and PT3/8 ports.
Quick checklist
At 0.5 MPa, the SE63X85 delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
This specific SE63X85 SKU lacks the built-in magnet (-S option) required for AirTAC CMSE reed or DMSE electronic sensors. If position feedback is needed, select an SE63X85S variant instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.