
The AirTAC SE63 Standard Cylinder SE63X900S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 900mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X900S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa across its extended 900 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies bracket installation on long-stroke machinery.
Equipped with a built-in magnet (-S), this unit seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, absorbing kinetic energy smoothly rather than relying on a fixed rubber bumper.
| Model | Airtac SE63 Standard Cylinder SE63X900S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 900 mm stroke and 1559 N push to index heavy loaded pallets smoothly between roller conveyor sections in automated distribution hubs.
Raises and lowers mezzanine safety gates, relying on the 63 mm bore's 2182 N extend force at 0.7 MPa to reliably lift heavy steel frames.
Deploys the extended reach to fold oversized corrugated carton flaps, while the adjustable cushion softens the impact at the end of the 900 mm travel.
Selecting the SE63X900S is ideal when you need substantial reach paired with mid-tier thrust. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas upgrading to the 80 mm bore provides 2513 N for heavier payloads. Because this is a 900 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads; always incorporate an external guide rail to prevent rod-bearing damage and premature seal wear.
This model is dimensionally interchangeable with other ISO 15552 profile cylinders, ensuring a direct retrofit using standardized mounting accessories. Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered—this unit will not hold a vertical load safely without a pilot-operated check valve or a dedicated BSE rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder features a PT3/8 port and a 20 mm rod. It outputs 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and achieves a maximum push of 318 kgf at 1.0 MPa.
Yes, the SE63X900S shares the exact ISO 15552 mounting interface and dimensions, allowing it to serve as a direct replacement for comparable profile cylinders. You can reuse existing mounting hardware and use the built-in magnet with AirTAC CMSE or DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.