Airtac SE63 Standard Cylinder SE63X90FTC
The AirTAC Airtac SE63 Standard Cylinder SE63X90FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 90mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ63 mm
- Stroke90 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X90FTC
The AirTAC SE63X90FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 63 mm bore unit features a PT3/8 port and a 90 mm stroke, utilizing a field-adjustable air cushion at both ends to decelerate the piston smoothly before end-of-stroke impact. Because this specific SKU lacks the -S magnet suffix, it is not equipped for CMSE or DMSE electronic position sensing out of the box.
Airtac SE63 Standard Cylinder SE63X90FTC Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X90FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X90FTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X90FTC Is Used
Bottling Line Diverter
Actuates routing gates on a beverage conveyor, utilizing the 90 mm stroke and 1559 N push to swiftly redirect heavy glass bottle cases between packaging lanes.
Carton Flap Folder
Drives the mechanical arms that fold corrugated carton flaps prior to hot-melt gluing, relying on the 63 mm bore's consistent 1402 N retract force to overcome spring resistance.
Injection Mold Ejector
Provides the secondary knockout stroke for plastic injection molds, where the adjustable end cushions absorb kinetic energy from rapid 30-800 mm/s cycling.
Is the Airtac SE63 Standard Cylinder SE63X90FTC the Right Cylinder?
Selecting this 63 mm bore makes sense when your application requires the 1559 N push at 0.5 MPa that this model provides. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push, whereas stepping up to the 80 mm bore provides a substantial 2513 N for heavier demands. The integrated FTC mounting accessory simplifies front-trunnion attachment, and the standardized ISO 15552 footprint guarantees drop-in dimensional interchangeability with other global profile cylinders.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve centers; the adjustable cushion only softens the end-of-stroke stop and does not lock the load. If your fixture requires true position holding without live air, consider the BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X90FTC FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X90FTC is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and envelope as other profile cylinders. The FTC front trunnion mount utilizes these standard dimensions for straightforward retrofits.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X90FTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.