
The AirTAC SE63 Standard Cylinder SE63X950S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 950mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X950S is a double-acting single-rod ISO 15552 profile cylinder with a 63 mm bore and a 950 mm stroke. Because 950 mm exceeds the standard 1500 mm maximum for this bore, it is manufactured as a made-to-order non-standard stroke. It delivers a robust 1559 N push force at 0.5 MPa and utilizes a PT3/8 port.
This unit features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush. Equipped with a built-in magnet (-S), it supports CMSE reed and DMSE electronic position sensors. The field-adjustable air cushion at both ends allows technicians to tune end-of-stroke deceleration for high-speed cycles.
| Model | Airtac SE63 Standard Cylinder SE63X950S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 950 mm vertical arm to push completed pallets onto a wrapping station, utilizing the 1559 N push force to overcome sliding friction.
Positions sheet metal stops over a long 950 mm range, relying on the adjustable cushion to soften hard mechanical end stops during rapid positioning.
Actuates a pivoting gate to eject misaligned parts on a packaging line, using the built-in magnet to trigger DMSE electronic sensors for confirmation.
With a 950 mm stroke, this 63 mm bore cylinder generates 1559 N push at 0.5 MPa. If you need less force, the 50 mm bore provides 982 N push; if your load requires more, step up to the 80 mm bore which provides 2513 N push. Because this is a non-standard 950 mm stroke, expect a made-to-order lead time. The -S magnet enables CMSE/DMSE sensor integration. Remember, a plain SE cylinder drifts when air is lost; use a BSE rod lock for position holding. For a 950 mm stroke, the unsupported piston rod is highly susceptible to side-load bending, so an external guide is mandatory to prevent rod-bearing damage.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X950S delivers 1559 N push and 1402 N pull. At 0.7 MPa, push increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa operating pressure.
Yes, the SE63X950S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware of other ISO 15552 profile cylinders for easy retrofits.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.