
The AirTAC SE63 Standard Cylinder SE63X95S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 95mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X95S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing the standardized ISO 15552 mounting interface for universal hardware interchangeability.
Equipped with a built-in magnet (the S option), this 63 mm bore unit readily integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X95S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to secure heavy cast iron engine blocks during high-speed CNC milling operations.
Uses the 95 mm stroke to swiftly fold and compress corrugated cardboard flaps on high-throughput packaging lines.
Actuates a routing gate on a conveyor belt, leveraging the 1402 N pull force to redirect heavy wooden pallets.
Generating 1559 N of push at 0.5 MPa, this model sits perfectly between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push), letting you step down for lighter clamping or up for heavier lifting. Because it is a standard double-acting cylinder, it cannot hold a load if air pressure drops or the valve centers; if your packaging line requires true fail-safe position holding, consider the AirTAC BSE rod-lock variant. For a direct retrofit, match the 63 mm bore, 95 mm stroke, PT3/8 port, and your existing mounting accessory.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X95S provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, and it achieves a maximum push of 318 kgf at 1.0 MPa.
Yes, the SE63X95S is dimensionally interchangeable per the ISO 15552 standard. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same mounting hardware, PT3/8 port, and M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.