
The AirTAC SE80 Standard Cylinder SE80AX170 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX170 is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding industrial environments. It features an 80 mm bore and a 170 mm stroke, generating a substantial 2513 N push force at 0.5 MPa and up to 3518 N at 0.7 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing sensor grooves on three sides.
This specific configuration includes a SUS420J2 stainless steel rod (code A), making it highly suitable for corrosive or washdown duty. The unit relies on a PT3/8 port and a 25 mm rod with an M20x1.5 thread. It incorporates field-adjustable pneumatic cushioning at both ends to soften hard end stops at speed. Note that this SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SE80 Standard Cylinder SE80AX170 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 2513 N push force required to eject heavy loaded corrugated pallet cases off a packaging line, while the SUS420J2 stainless rod withstands occasional washdowns.
Utilizes the 170 mm stroke to secure and position mid-sized injection mold platens, using the adjustable cushion to absorb the 513 kgf impact at cycle end.
Drives the primary bending arm in a heavy-gauge metal forming press, relying on the 25 mm rod and M20x1.5 thread to handle high side-load stresses during forming.
Selecting this 80 mm bore cylinder makes sense when your application requires heavy linear thrust, such as the 2513 N push generated at 0.5 MPa. If you need less force, stepping down to the 63 mm bore yields 1559 N of push at 0.5 MPa. Conversely, scaling up to the 100 mm bore provides 3927 N of push at 0.5 MPa for heavier loads. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve. Furthermore, this model is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders without altering mounting hardware.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
The SE80AX170 generates a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force reaches 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, meaning it can serve as a direct replacement for other standard ISO 15552 profile cylinders. However, as a standard double-acting cylinder, it does not hold its position if air is lost; for load-holding, look at the BSE variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.