Airtac SE80 Standard Cylinder SE80AX180
The AirTAC Airtac SE80 Standard Cylinder SE80AX180 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke180 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX180
The AirTAC SE80AX180 is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion. With an 80 mm bore, it generates 2513 N of push force and 2268 N of pull force at 0.5 MPa, making it well-suited for heavy-duty positioning tasks. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This specific configuration features a SUS420J2 stainless steel rod (option A) for enhanced resistance against moisture and corrosive washdown environments. The cylinder operates at speeds between 30-800 mm/s and relies on a PT3/8 port. Field-adjustable air cushions at both stroke ends allow technicians to dial in deceleration, softening hard end stops to prevent impact damage during high-velocity operations.
Airtac SE80 Standard Cylinder SE80AX180 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX180 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX180
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX180 Is Used
Corrugated Box Erectors
Leveraging the 2513 N push force and SUS420J2 stainless rod, this cylinder reliably squares and seals heavy corrugated packaging in washdown packaging lines.
Metal Stamping Clamps
Provides the robust 180 mm stroke and high push force needed to secure heavy-gauge sheet metal blanks within mechanical stamping presses.
Food Processing Diverters
The corrosion-resistant stainless steel rod withstands daily washdowns while actuating 180 mm sorting gates to route bulk ingredients or containers.
Is the Airtac SE80 Standard Cylinder SE80AX180 the Right Cylinder?
When sizing this 80 mm bore model, consider stepping down to a 63 mm cylinder if your application only requires 1559 N of push at 0.5 MPa, or stepping up to a 100 mm bore if you need the 3927 N push capacity to move heavier payloads. Because this is a double-acting cylinder, it will not hold a load in place if air pressure is lost or the valve is centered; the piston will drift. For position-holding requirements, explore a BSE rod lock variant or an external pilot-operated check valve.
As a true ISO 15552 profile cylinder, the SE80AX180 serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting interface holes for easy retrofits. This SKU does not include a position-sensing magnet, so it cannot directly host CMSE or DMSE switches without modification. Furthermore, with a 180 mm stroke, the 25 mm rod and M20x1.5 thread handle substantial loads, but any long unsupported stroke still warrants an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX180 FAQ
This 80 mm bore cylinder delivers 2513 N of push force and 2268 N of pull force at 0.5 MPa, scaling to 3518 N push at 0.7 MPa, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and uses a PT3/8 port.
Yes, its ISO 15552 profile dimensions allow it to serve as a drop-in replacement for other standard ISO 15552 cylinders. However, it is a double-acting cylinder and cannot hold a load unpowered; if air is lost, the piston will drift unless paired with a BSE rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX180
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.