Airtac SE80 Standard Cylinder SE80AX190S
The AirTAC Airtac SE80 Standard Cylinder SE80AX190S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke190 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX190S
The AirTAC SE80AX190S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding industrial environments. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a 25 mm SUS420J2 stainless steel piston rod (code A) to resist corrosion in washdown or chemically harsh settings. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while preventing debris buildup.
Equipped with a built-in magnet (code S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-stop deceleration via a set screw, effectively absorbing kinetic energy at speeds up to 800 mm/s without relying on fixed rubber bumpers.
Airtac SE80 Standard Cylinder SE80AX190S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX190S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX190S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX190S Is Used
CNC Fixture Clamping
Delivers 2513 N of thrust at 0.5 MPa to secure heavy cast iron housings during high-speed CNC machining, utilizing the SUS420J2 rod to resist coolant splashing.
Pallet Diverter Arm
Actuates a 190 mm stroke routing mechanism to push heavy pallets onto secondary packaging lines, relying on adjustable cushioning to soften end impacts at high speeds.
Chemical Dip Tank Lid
Raises and lowers tank lids in a washdown area, where the SUS420J2 stainless rod and extruded aluminum body withstand corrosive vapor exposure better than standard carbon steel.
Is the Airtac SE80 Standard Cylinder SE80AX190S the Right Cylinder?
Generating 2513 N of thrust at 0.5 MPa, this 80 mm bore is ideal for medium-to-heavy actuation. If your application requires less force, stepping down to the 63 mm bore yields 1559 N push, whereas moving up to the 100 mm bore provides 3927 N. Remember that an unpowered SE cylinder will drift and cannot hold a load mid-stroke; for fail-safe position holding, consider the BSE rod-lock variant or an external pilot-operated check valve. To match existing ISO 15552 hardware, confirm the 190 mm stroke, PT3/8 port, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX190S FAQ
The SE80AX190S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It features a PT3/8 port and a 25 mm rod with an M20x1.5 thread.
Yes, the SE80AX190S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hole patterns of other ISO 15552 profile cylinders for drop-in retrofitting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX190S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.