Airtac SE80 Standard Cylinder SE80AX195S
The AirTAC Airtac SE80 Standard Cylinder SE80AX195S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX195S
The AirTAC SE80AX195S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic motion. It generates 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, making it well-suited for high-thrust automation. The square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush and resists corrosion.
This specific configuration features a SUS420J2 stainless steel rod (code A) for washdown durability, and includes a built-in magnet (code S) for non-contact position sensing. You can field-adjust the pneumatic air cushion at both ends via a set screw to soften end-of-stroke impacts at high speeds. It operates at 30-800 mm/s and is dimensionally interchangeable per ISO 15552 standards.
Airtac SE80 Standard Cylinder SE80AX195S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX195S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX195S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX195S Is Used
Palletizer Case Erector
Drives the folding arms of a corrugated case erector with 2513 N push at 0.5 MPa, utilizing the 195mm stroke to clear large pallet perimeters.
Metal Stamping Press
Feeds heavy-gauge coil stock into a mechanical stamping press, relying on the SUS420J2 stainless rod to withstand coolant spray and debris.
Injection Mold Separator
Breaks away thick injection-molded plastic parts from the sprue, using the field-adjustable cushion to decelerate the 80mm piston smoothly at 800 mm/s.
Is the Airtac SE80 Standard Cylinder SE80AX195S the Right Cylinder?
When sizing this 80mm bore actuator, compare its 2513 N push @0.5 MPa against the smaller 63mm bore (1559 N push) or the larger 100mm bore (3927 N push) to ensure you have the exact thrust margin required. If your machinery must hold a load vertically without live air pressure, note that this standard cylinder will drift; you should integrate an external pilot-operated check valve or select an AirTAC BSE rod-lock variant. For retrofitting, this model matches the ISO 15552 mounting interface, PT3/8 ports, and a 195mm stroke, and its -S magnet supports CMSE reed and DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX195S FAQ
The SE80AX195S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa operating pressure.
Yes, the SE80AX195S is dimensionally interchangeable per ISO 15552 standards. It shares the exact 80mm bore, 195mm stroke, PT3/8 port, and standard mounting footprint, allowing a direct drop-in replacement for other ISO 15552 cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.