verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80AX210

The AirTAC SE80 Standard Cylinder SE80AX210 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke210 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$188.87 $196.37Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE80 Standard Cylinder SE80AX210

The AirTAC SE80AX210 is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding industrial environments. It generates a robust 2513 N of push force at 0.5 MPa and features a 210 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.

This specific SKU is built with a SUS420J2 stainless steel rod (option A) for superior corrosion and washdown resistance. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, preventing hard impacts during high-speed operations. Note that this unit lacks a built-in magnet, so it is not ready for CMSE or DMSE position sensing without modification.

Airtac SE80 Standard Cylinder SE80AX210 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80AX210
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke210 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80AX210

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80AX210 Is Used

packaging

Corrugated Box Forming

Drives the folding plows on high-speed corrugated box forming machinery, utilizing the 2513 N push force and washdown-resistant SUS420J2 rod to withstand dusty, humid environments.

straighten

Pallet Notching Press

Applies the straightening and notching pressure on wooden pallet assembly lines, where the field-adjustable air cushions absorb the 210 mm stroke impacts reliably.

science

Beverage Filtration Skid

Actuates diverter valves on beverage filtration skids, benefiting from the SUS420J2 stainless steel rod that resists moisture and frequent chemical washdowns.

Is the Airtac SE80 Standard Cylinder SE80AX210 the Right Cylinder?

When sizing this actuator, consider stepping down to the 63 mm bore (delivering 1559 N push at 0.5 MPa) if your load is lighter, or stepping up to the 100 mm bore (providing 3927 N push at 0.5 MPa) for heavier machinery. As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for comparable ISO 15552 cylinders, sharing standard mounting hardware and port sizes (PT3/8). Because the 210 mm stroke exceeds 300 mm, it is highly recommended to use an external guide to prevent rod-bearing bending under side loads. Remember that a standard SE cylinder relies on live air pressure to hold a load; if the air is lost, the piston will drift, so integrate a BSE rod lock for fail-safe positioning.

AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80AX210 FAQ

The SE80AX210 delivers 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, and the maximum push force is 513 kgf at 1.0 MPa. It features an 80 mm bore, 210 mm stroke, PT3/8 port, and operates at speeds of 30-800 mm/s.

Yes, its standardized ISO 15552 mounting interface makes it dimensionally interchangeable with other ISO 15552 profile cylinders. However, it does not hold a load if air pressure is lost; for position holding, you need a BSE rod lock variant or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80AX210

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE80AX210 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.