Airtac SE80 Standard Cylinder SE80AX230
The AirTAC Airtac SE80 Standard Cylinder SE80AX230 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX230
The AirTAC SE80AX230 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush and resists corrosion in demanding environments.
This specific SKU features a SUS420J2 stainless steel rod (option A) engineered for washdown and corrosive duty, operating at 30-800 mm/s. Because it lacks the -S magnet code, it does not support CMSE or DMSE position sensors out of the box, relying instead on its field-adjustable pneumatic cushioning at both ends to decelerate loads smoothly.
Airtac SE80 Standard Cylinder SE80AX230 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX230 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX230
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX230 Is Used
Beverage Line Capping
Drives capping heads on a rinse-fill-cap carousel where the SUS420J2 rod withstands daily chemical washdowns while providing 2513 N of capping force.
Pallet Divert Gate
Actuates a heavy diverting gate on a packaging conveyor, utilizing the 230 mm stroke to reroute full pallets smoothly into labeling lanes.
Corrugated Box Press
Applies 3518 N of force at 0.7 MPa to flatten and square corrugated carton blanks prior to folding and adhesive application.
Is the Airtac SE80 Standard Cylinder SE80AX230 the Right Cylinder?
When sizing this 80 mm bore, stepping down to a 63 mm unit drops the 0.5 MPa push output to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. This SE80AX230 uses a PT3/8 port and a 25 mm rod, making it dimensionally interchangeable with other ISO 15552 cylinders for straightforward retrofits using standard mounting hardware.
With a 230 mm stroke, the unsupported piston rod is subject to bending forces under heavy side loads, so an external guide rail is recommended to prevent premature bearing wear. Note that a plain SE cylinder drifts when air pressure is lost or exhausted; if your application requires static load holding without live pressure, consider a BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX230 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum push capacity is 513 kgf when operated at the 1.0 MPa pressure limit.
No, the standard SE series does not hold position when air is lost or exhausted, as the adjustable air cushion only decelerates the piston near stroke end rather than locking it. For fail-safe load holding, you would need the BSE variant with an integrated rod lock or an external mechanical guide.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX230
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.