
The AirTAC SE80 Standard Cylinder SE80AX25 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 25mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX25 is a double-acting, single-rod ISO 15552 profile cylinder with an 80 mm bore and a 25 mm stroke. It delivers a robust 2513 N push force at 0.5 MPa, making it well-suited for heavy-duty positioning tasks. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific SKU features a SUS420J2 stainless steel rod (code A) for superior resistance to moisture and washdown chemicals. It lacks a built-in magnet, meaning position sensing is not available on this unit without modification. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration precisely, absorbing kinetic energy to prevent hard mechanical impacts.
| Model | Airtac SE80 Standard Cylinder SE80AX25 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 2513 N push force to secure heavy machine tool safety doors, while the SUS420J2 rod withstands splash from cutting fluids.
Handles high-speed routing of glass containers with a short 25 mm stroke, relying on the tuned pneumatic cushion to soften stops.
Provides rugged 80 mm bore actuation to strip finished plastic parts from molds, benefiting from the flush no-tie-rod profile.
If your application requires less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, whereas upgrading to the 100 mm bore provides a 3927 N push for heavier loads. As a standard ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, allowing a direct retrofit using existing mounting hardware and a PT3/8 port. Note that a plain SE cylinder does not hold its load when air pressure is lost or exhausted; if your process requires true mechanical holding, consider the BSE rod lock variant.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N. The maximum allowable push force is 513 kgf at 1.0 MPa.
Yes, it features a standard ISO 15552 / VDMA 24562 mounting interface, making it dimensionally interchangeable with other ISO 15552 profile cylinders. It uses a PT3/8 port and an M20x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.