
The AirTAC SE80 Standard Cylinder SE80AX35 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 35mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX35 is a double-acting, single-rod ISO 15552 profile cylinder delivering 2513 N of push force at 0.5 MPa. Built with a SUS420J2 stainless steel rod, it is engineered for corrosive and washdown environments where standard carbon steel pistons would fail prematurely.
The extruded aluminum barrel omits external tie rods, creating a flush, compact profile that resists debris buildup and simplifies mounting. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, minimizing impact damage on fast cycles. Note that this SKU lacks a position-sensing magnet.
| Model | Airtac SE80 Standard Cylinder SE80AX35 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the cross-sealing jaw on vertical form-fill-seal machines, using the 2513 N push force to crimp thick laminated films reliably during continuous washdown cycles.
Actuates stainless steel guide rails to route glass bottles between processing lanes, leveraging the SUS420J2 rod to withstand daily caustic chemical washdowns.
Indexes coarse pulp screens in paper mills, where the corrosion-resistant rod material survives high-humidity, mildly acidic atmospheres over short 35 mm strokes.
Delivering 2513 N push at 0.5 MPa, this 80 mm bore fits mid-heavy automation. If your load is lighter, the 63 mm bore offers 1559 N push; for heavier demands, the 100 mm bore provides 3927 N. A standard SE cylinder relies on live air pressure to hold position; if air is lost, the piston drifts. For fail-safe load holding, consider the BSE rod-lock variant. At 35 mm stroke, side-load bending is negligible, but longer unsupported strokes require an external guide. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement sharing standard mounting interfaces.
Quick checklist
The SE80AX35 generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It features a PT3/8 port and a 25 mm diameter SUS420J2 stainless steel rod.
Yes. The SE80AX35 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and interface of other standard profile cylinders. You can use your existing ISO mounting brackets and rod-end joints without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.