Airtac SE80 Standard Cylinder SE80AX500S
The AirTAC Airtac SE80 Standard Cylinder SE80AX500S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke500 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX500S
The AirTAC SE80AX500S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 500 mm stroke. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling to 3518 N push at 0.7 MPa. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and reduces debris buildup in tight machinery layouts.
This configuration includes a SUS420J2 stainless steel rod (code A) for washdown and corrosive environments, alongside a built-in magnet (code S) for CMSE reed and DMSE electronic position sensing. Field-adjustable pneumatic cushioning at both ends allows precise deceleration tuning to soften hard end stops at high cycling speeds.
Airtac SE80 Standard Cylinder SE80AX500S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX500S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX500S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX500S Is Used
Palletizer Case Erector
With 2513 N push at 0.5 MPa and a 500 mm stroke, this cylinder folds heavy corrugated cardboard blanks on high-speed end-of-line packaging machines.
Metal Stamping Ejector
The SUS420J2 stainless rod withstands coolant splash while providing the 3518 N push at 0.7 MPa needed to kick heavy stamped metal blanks out of a progressive die.
Bottling Line Diverter
A 500 mm stroke actuates heavy lane guide arms to sort filled beverage crates, utilizing the built-in magnet for DMSE electronic end-position confirmation.
Is the Airtac SE80 Standard Cylinder SE80AX500S the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80 mm bore fits mid-heavy actuation. If your load is lighter, the 63 mm bore offers 1559 N push; for heavier dynamics, the 100 mm bore provides 3927 N push. Note that a standard SE cylinder drifts when air is lost or the valve centers—it cannot hold a load without live pressure. For positive holding, use a BSE rod lock or external check valve.
At 500 mm, the Ø25 mm rod and M20x1.5 thread handle substantial side loads, but long unsupported strokes risk rod-bearing bending; always use an external guide. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement sharing standard mounting dimensions and PT3/8 ports with other ISO 15552 cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX500S FAQ
The SE80AX500S provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It uses a PT3/8 port and operates at speeds of 30-800 mm/s.
Dimensionally interchangeable per ISO 15552, it drops into existing footprints sharing standard mounting hardware. However, the adjustable air cushion only decelerates the piston near stroke end; it is not a lock. The cylinder will drift without air pressure, so a BSE rod lock is needed for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX500S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.