Airtac SE80 Standard Cylinder SE80AX60
The AirTAC Airtac SE80 Standard Cylinder SE80AX60 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX60
The AirTAC SE80AX60 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It generates 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, utilizing a 25 mm rod with an M20x1.5 thread. The code includes an A designation, meaning the rod is constructed from SUS420J2 stainless steel for superior corrosion resistance in washdown or chemically harsh environments.
Unlike traditional tie-rod designs, this unit features a square extruded aluminum barrel that mounts flush against machine frames, saving valuable space. The pneumatic cushioning at both ends is field-adjustable via a screw, allowing operators to tune end-of-stroke deceleration and eliminate hard metal-to-metal impacts. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
Airtac SE80 Standard Cylinder SE80AX60 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX60 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX60
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX60 Is Used
Palletizer Case Pusher
With 2513 N of push force at 0.5 MPa, this cylinder easily shuffles heavy loaded corrugated cases onto palletizer infeed conveyors without hesitation.
Food Washdown Gate
The SUS420J2 stainless steel rod resists moisture and cleaning chemicals in food processing lines, reliably actuating 60 mm stroke diversion gates.
Injection Mold Ejector
Provides robust 3518 N of thrust at 0.7 MPa to positively eject dense plastic injection molded parts from heavy tooling within a 60 mm stroke envelope.
Is the Airtac SE80 Standard Cylinder SE80AX60 the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application requires 2513 N of push at 0.5 MPa. If your load is lighter, stepping down to the 63 mm bore yields 1559 N of push, saving space and air consumption. Conversely, if you need to move heavier jigs, stepping up to the 100 mm bore provides 3927 N of push. Keep in mind that a standard SE cylinder will drift if air pressure is lost or the valve is centered; for position holding, consider the BSE rod lock variant. Because this unit uses a PT3/8 port and standard ISO 15552 mounting dimensions, it serves as a direct drop-in replacement for any compliant cylinder on the market.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX60 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N, with a maximum push of 513 kgf at 1.0 MPa. It features an 80 mm bore, a 60 mm stroke, a PT3/8 port, a 25 mm rod, an M20x1.5 rod thread, and a 36 mm cushion length.
Yes, the SE80AX60 is dimensionally interchangeable per ISO 15552 standards. You can swap it directly using your existing mounting hardware. However, because this specific SKU lacks the -S magnet suffix, it will not trigger AirTAC CMSE or DMSE sensors if your old setup relied on them.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.