Airtac SE80 Standard Cylinder SE80AX700S
The AirTAC Airtac SE80 Standard Cylinder SE80AX700S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke700 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX700S
The AirTAC SE80AX700S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 700 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 footprint.
This configuration integrates a SUS420J2 stainless steel rod (option A) for superior resistance to corrosion and washdown chemicals. A built-in magnet (option S) enables seamless positioning feedback when paired with AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, preventing harsh mechanical impacts during high-speed operations.
Airtac SE80 Standard Cylinder SE80AX700S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX700S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX700S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX700S Is Used
Palletizer Diverter Gate
Leveraging the 2513 N push force and 700 mm stroke, this actuator reliably diverts heavy pallets onto secondary packaging lines while the SUS420J2 rod withstands occasional washdown spray.
CNC Lathe Bar Feeder
The 700 mm stroke provides the extended reach needed to push raw bar stock into CNC spindles, with the adjustable cushion ensuring smooth retraction without jarring the feeder mechanism.
Automated Storage Crane
Uses the integrated magnet and DMSE electronic sensors to track shuttle positioning across the 700 mm length, while the high 3518 N push at 0.7 MPa handles heavy tote retrieval.
Is the Airtac SE80 Standard Cylinder SE80AX700S the Right Cylinder?
When sizing this actuator, compare its 2513 N push at 0.5 MPa against adjacent bores: the 63 mm variant yields 1559 N, while the 100 mm variant provides 3927 N, allowing you to step up or down based on your exact load. The 700 mm stroke is a standard length for this bore, but at this extension the 25 mm rod and internal bearing face significant bending moments if subjected to lateral loads; always pair it with an external guide to prevent premature seal wear. For retrofits, the unit shares the exact mounting interface and PT3/8 port of other ISO 15552 cylinders, and accepts standard FA, LB, or TC brackets. Note that this cylinder relies on air pressure to move and hold position; it will drift if air is lost, so add a BSE rod lock for fail-safe load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX700S FAQ
At 0.5 MPa, this 80 mm bore cylinder outputs 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum drive force is 513 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE80AX700S is dimensionally interchangeable with any standard ISO 15552 profile cylinder. You can reuse existing mounting brackets and PT3/8 port connections, but ensure your shock settings match the 36 mm cushion length.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.