Airtac SE80 Standard Cylinder SE80BX100FB
The AirTAC Airtac SE80 Standard Cylinder SE80BX100FB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX100FB
The AirTAC SE80BX100FB is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 2513 N push force at 0.5 MPa. This specific configuration pairs an 80 mm bore with a 100 mm stroke and features a SUS304 stainless steel rod, making it highly suitable for corrosive or washdown environments where standard carbon steel rods would fail prematurely.
Unlike traditional tie-rod bodies, its extruded aluminum barrel offers a flush, corrosion-resistant exterior with integrated sensor grooves on three sides. The cylinder incorporates field-adjustable air cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a set screw to minimize impact wear on fast cycling lines.
Airtac SE80 Standard Cylinder SE80BX100FB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX100FB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX100FB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX100FB Is Used
CNC Lathe Bar Feeder
Drives heavy bar stock pushers into CNC spindles, utilizing the 2513 N thrust and SUS304 rod to resist coolant washdown.
Pallet Divert Arm
Actuates a heavy divert arm on a 100 mm stroke to reroute loaded pallets, relying on the rear flange mount for rigid torque resistance.
Heavy Carton Sealer
Applies precise downward clamping force on large corrugated cartons, using adjustable end cushions to soften the 100 mm stroke impact.
Is the Airtac SE80 Standard Cylinder SE80BX100FB the Right Cylinder?
When sizing this 80 mm bore model, consider stepping down to a 63 mm cylinder if your load requires less than 1559 N of push at 0.5 MPa, or moving up to a 100 mm bore if you need a higher 3927 N thrust. This SKU includes a rear flange (FB) mounting accessory for rigid rear-plate attachment, uses a PT3/8 port, and lacks a built-in position magnet, so it is not compatible with CMSE or DMSE electronic sensors without modification. Because it is a standard double-acting cylinder, it cannot hold a load if air pressure drops; for dead-load holding, explore the BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX100FB FAQ
This 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80BX100FB is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a drop-in replacement for other ISO 15552 cylinders with matching 80 mm bores and 100 mm strokes, sharing the same mounting footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX100FB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.