Airtac SE80 Standard Cylinder SE80BX160SH
The AirTAC Airtac SE80 Standard Cylinder SE80BX160SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX160SH
The AirTAC SE80BX160SH is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous washdown and high-temperature environments. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and 160 mm stroke. Equipped with a SUS304 stainless steel rod and FKM Viton seals, this variant reliably operates in ambient temperatures up to 150 °C where standard TPU seals would quickly degrade.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated magnet (-S) enables precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors housed neatly within the body's three sensor grooves.
Airtac SE80 Standard Cylinder SE80BX160SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX160SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX160SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX160SH Is Used
Automotive Parts Washdown
Drives heavy fixtures through high-temperature degreasing tunnels, leveraging the 3518 N push at 0.7 MPa and FKM seals to survive harsh chemical spray.
Hot-Melt Palletizing
Actuates 160 mm lift strokes to press and seat hot-melt adhesive patterns on corrugated cartons, using the SUS304 rod to resist accidental moisture exposure.
Industrial Oven Doors
Cycles heavy thermal chamber doors where ambient heat exceeds 70 °C, relying on Viton seals to maintain a tight pneumatic seal across 513 kgf max push.
Is the Airtac SE80 Standard Cylinder SE80BX160SH the Right Cylinder?
Selecting this 80 mm bore makes sense when your application requires substantial thrust between the 63 mm class (1559 N push at 0.5 MPa) and the 100 mm class (3927 N push at 0.5 MPa). The 25 mm rod and M20x1.5 thread provide excellent rigidity for absorbing side loads, though any stroke exceeding 300 mm on larger bores warrants an external guide to prevent rod-bearing bending.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders, matching the PT3/8 port and standardized mounting accessories exactly. Note that while the field-adjustable air cushions at both ends decelerate the piston smoothly near stroke end, this cylinder cannot hold a load if air pressure is lost; applications requiring static position holding must integrate a BSE rod lock or external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX160SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. Thanks to the FKM Viton seals, it operates reliably in temperatures from -20 to 150 °C.
Yes, it is dimensionally interchangeable with any standard ISO 15552 profile cylinder, sharing identical mounting and PT3/8 port dimensions. However, the adjustable air cushions only decelerate the piston near stroke end and do not act as a brake; the cylinder will drift if air pressure is lost, so you must add a BSE rod lock for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX160SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.