Airtac SE80 Standard Cylinder SE80BX500SH
The AirTAC Airtac SE80 Standard Cylinder SE80BX500SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke500 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX500SH
The AirTAC SE80BX500SH is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous washdown and high-temperature automation. It generates 2513 N of push force at 0.5 MPa and utilizes a 500 mm stroke. The unit incorporates a SUS304 stainless steel rod (code B) paired with FKM Viton seals (code H), extending the operating temperature range from -20 to +150 C for harsh chemical environments.
Built on an extruded aluminum barrel without external tie rods, this profile cylinder offers a flush, corrosion-resistant exterior that simplifies mounting and cleaning. The integrated magnet (-S) supports AirTAC CMSE reed and DMSE electronic sensors for precise position feedback, while field-adjustable pneumatic cushioning at both ends allows you to tune deceleration and soften hard end stops dynamically.
Airtac SE80 Standard Cylinder SE80BX500SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX500SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX500SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX500SH Is Used
Brewery Pasteurizer Pusher
Leverages the 2513 N push force and SUS304 rod to index heavy beverage crates through a hot washdown zone, where the FKM seal survives +150 C steam and caustic cleaners.
Pallet Transfer Diverter
Employs the 500 mm stroke and DMSE electronic sensor feedback to reliably divert heavy pallets onto secondary packaging lines without mechanical binding.
CNC Chip Blower Actuator
Uses the adjustable pneumatic cushioning to soften high-speed 80 mm bore strokes, clearing metal chips from machining centers while enduring coolant mist.
Is the Airtac SE80 Standard Cylinder SE80BX500SH the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80 mm bore fits heavy-duty actuation needs. If your application requires less force, the 63 mm bore provides 1559 N push; conversely, stepping up to the 100 mm bore yields 3927 N. Remember that a standard SE cylinder relies on live air pressure to maintain its position and will drift if air is lost or the valve is centered—use a BSE rod lock for fail-safe load holding.
For a 500 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads. Implementing an external guide rail is strongly recommended to prevent premature rod-bearing wear. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, utilizing the PT3/8 port and standard mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX500SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N push and 2268 N pull. At 0.7 MPa, push increases to 3518 N, with a maximum push of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards. The H seal code specifies FKM Viton elastomers, expanding the temperature range to +150 C, and the B rod code indicates a SUS304 stainless steel rod for washdown corrosion resistance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX500SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.