Airtac SE80 Standard Cylinder SE80X1000SH
The AirTAC Airtac SE80 Standard Cylinder SE80X1000SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1000mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1000SH
The AirTAC SE80X1000SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. It delivers a robust 2513 N push force at 0.5 MPa across a 1000 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in confined machinery spaces.
Equipped with a Viton (FKM) seal, this unit operates reliably in elevated thermal environments up to 150 C. The integrated -S magnet interfaces directly with CMSE reed and DMSE electronic sensors for precise end-position detection, while field-adjustable air cushions at both ends allow you to tune deceleration and soften hard mechanical stops.
Airtac SE80 Standard Cylinder SE80X1000SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1000SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1000SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1000SH Is Used
Pallet Transfer Rejector
Uses the 2513 N push force at 0.5 MPa to shove heavy 1000 mm loaded pallets cleanly off a high-speed packaging line without stalling.
Injection Mold Platen Ejector
The FKM seal survives ambient heat up to 150 C near molding machines, while the 1000 mm stroke clears large formed parts from the tooling area.
Automated Press Feed
Leverages the 36 mm adjustable cushion length to decelerate the heavy rod assembly smoothly when shuttling metal blanks into a stamping press.
Is the Airtac SE80 Standard Cylinder SE80X1000SH the Right Cylinder?
Selecting this 80 mm bore makes sense when a 63 mm cylinder (1559 N push @0.5 MPa) lacks thrust, but a 100 mm bore (3927 N push @0.5 MPa) would be physically oversized. Because the 1000 mm stroke is substantial, the Ø25 mm piston rod and rod-bearing face significant bending moments under side loading; always pair this unit with an external linear guide to prevent premature seal wear. The PT3/8 ports and standardized ISO 15552 mounting dimensions ensure a drop-in replacement for any equivalent profile cylinder.
Note that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism. If your process must hold a vertical load without live air pressure, integrate an external pilot-operated check valve or specify a BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1000SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Yes, the SE80X1000SH is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other standard profile cylinders. The built-in -S magnet is specifically designed to mount AirTAC CMSE reed switches and DMSE electronic sensors in the body grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1000SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.