Airtac SE80 Standard Cylinder SE80X100SCB
The AirTAC Airtac SE80 Standard Cylinder SE80X100SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100SCB
The AirTAC SE80X100SCB is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa and up to 3518 N at 0.7 MPa. It features an 80 mm bore, 100 mm stroke, a PT3/8 port, and a robust Ø25 mm rod with an M20x1.5 thread. The CB double-clevis mounting accessory is integrated directly into the rear cap, making it ideal for pivoting rod-end joint arrangements.
Unlike traditional round-body or tie-rod actuators, this unit utilizes a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames. The included -S magnet enables seamless position tracking via AirTAC CMSE reed or DMSE electronic sensors housed in the three-sided sensor groove. Furthermore, the field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial out harsh end-of-stroke impacts during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80X100SCB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100SCB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100SCB Is Used
Palletizer Flap Folding
Drives a pivoting mechanical arm to tuck cardboard flaps on corrugated palletizers, utilizing the 2513 N push force and CB clevis to swing cleanly through the 100 mm arc.
Injection Mold Ejection
Mounts to the rear of an injection molding machine to actuate a heavy swing gate, relying on the Ø25 mm rod and adjustable cushions to absorb high kinetic energy at 800 mm/s.
Metal Stamping Stripper
Pushes a stripper plate downward in a progressive die press, where the 3518 N thrust at 0.7 MPa ensures the plate holds rigid against heavy spring-back forces.
Is the Airtac SE80 Standard Cylinder SE80X100SCB the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force requirements against its 2513 N push at 0.5 MPa. If your load is lighter, stepping down to the 63 mm bore yields 1559 N of push force while saving footprint and air consumption. Conversely, if you need more thrust, stepping up to the 100 mm bore provides 3927 N at the same pressure. Because this configuration uses a CB double-clevis mount, ensure your pivot pin matches the clevis width to prevent binding during stroke transitions.
This standard 100 mm stroke falls well within the 1500 mm maximum for this bore, keeping the Ø25 mm rod well-supported by the standard bearing. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders, sharing identical mounting footprint dimensions and rod thread sizes. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If your pivoting mechanism must maintain vertical position when air pressure is lost or the valve is centered, you must integrate an external BSE rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100SCB FAQ
This 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It features a PT3/8 port, a Ø25 mm rod, and an M20x1.5 rod-end thread.
The CB configuration includes a rear double-clevis mounting bracket designed for pivoting applications, while the -S option adds a built-in magnet for use with AirTAC CMSE reed and DMSE electronic sensors. It is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing standard mounting dimensions without relying on external tie rods.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.