Airtac SE80 Standard Cylinder SE80X100SFTC
The AirTAC Airtac SE80 Standard Cylinder SE80X100SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100SFTC
The AirTAC SE80X100SFTC is a double-acting single-rod ISO 15552 profile cylinder delivering a robust 2513 N push force at 0.5 MPa. Its extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush on equipment while exposing sensor grooves on three sides.
This specific configuration includes a built-in magnet for CMSE reed and DMSE electronic position sensing, paired with an FTC center trunnion mounting bracket for pivoting loads. The field-adjustable pneumatic cushioning at both ends allows precise deceleration tuning to absorb hard end-stop impacts at speed.
Airtac SE80 Standard Cylinder SE80X100SFTC Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100SFTC Is Used
Palletizer Pivoting Arm
Drives a heavy-tier palletizing arm via the FTC trunnion mount, utilizing the 2513 N push force to stack 50kg assembly pallets without deflection.
Injection Mold Ejection
Ejects dense automotive interior panels from injection molds, relying on the 36mm adjustable end cushion to soften the 100mm stroke impact at high speed.
Heavy Belt Diverter
Actuates a sorting diverter on a mining conveyor belt, using the built-in magnet with DMSE electronic sensors to confirm full extension in harsh environments.
Is the Airtac SE80 Standard Cylinder SE80X100SFTC the Right Cylinder?
Select this 80mm bore when your application requires the 2513 N push at 0.5 MPa (3518 N at 0.7 MPa). If your load is lighter, stepping down to the 63mm bore yields 1559 N push, whereas stepping up to the 100mm bore provides 3927 N push. Keep in mind a standard SE cylinder will drift if air pressure is lost; for fail-safe load holding, consider the BSE rod lock variant.
For this FTC-mounted unit, ensure the pivoting load is guided to avoid excessive side-load on the rod bearing. The PT3/8 port and M20x1.5 rod thread handle substantial airflow and structural load, making it dimensionally interchangeable with any ISO 15552 cylinder footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100SFTC FAQ
At 0.5 MPa, this 80mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE80 profile cylinder is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, port sizes (PT3/8), and rod thread (M20x1.5) with other standard ISO 15552 cylinders. The FTC trunnion mount and built-in sensor magnet match standard accessory interfaces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.