Airtac SE80 Standard Cylinder SE80X132
The AirTAC Airtac SE80 Standard Cylinder SE80X132 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 132mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke132 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X132
The AirTAC SE80X132 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa and a maximum of 513 kgf at 1.0 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while integrating seamlessly with standardized ISO 15552 hardware.
This 80 mm bore unit features a 2513 N extend force alongside a 2268 N retract force, operating at speeds from 30-800 mm/s. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a screw, softening hard mechanical stops during high-speed actuation. Since this specific SKU lacks the -S magnet code, it is not wired for CMSE or DMSE position sensing out of the box.
Airtac SE80 Standard Cylinder SE80X132 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X132 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 132 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X132
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×132 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X132 Is Used
CNC Fixture Clamping
Provides 2513 N of extend force at 0.5 MPa to securely clamp heavy cast iron engine blocks during high-speed CNC machining operations.
Pallet Diverter Arm
Actuates a heavy mechanical arm to reroute loaded pallets on a packaging line, utilizing the 132 mm stroke to clear the conveyor path.
Corrugated Box Flap Folder
Drives a folding mechanism at up to 800 mm/s to rapidly tuck heavy cardboard flaps on automated case sealing machinery.
Is the Airtac SE80 Standard Cylinder SE80X132 the Right Cylinder?
When sizing this actuator, evaluate your thrust margin: if 2513 N at 0.5 MPa is excessive, the adjacent 63 mm bore offers a lighter 1559 N push, whereas stepping up to the 100 mm bore yields 3927 N for heavier payloads. This 132 mm stroke is a standard configuration, but because it exceeds 300 mm thresholds it is worth noting that longer unsupported strokes increase rod-bearing bending; always verify side loads and utilize an external guide to prevent premature seal wear.
For retrofitting, this cylinder is dimensionally interchangeable per ISO 15552, meaning it serves as a direct drop-in replacement for competing profile cylinders. The base configuration includes a PT3/8 port, a Ø25 mm hard-chrome rod with an M20x1.5 thread, and basic mounting. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your application must maintain position without live air pressure, you must pivot to the BSE rod-lock variant or use an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X132 FAQ
The SE80X132 delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X132 is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other standard profile cylinders. It uses a PT3/8 port and a Ø25 mm rod with an M20x1.5 thread, ensuring compatibility with existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X132
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.