Airtac SE80 Standard Cylinder SE80X15
The AirTAC Airtac SE80 Standard Cylinder SE80X15 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 15mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke15 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X15
The AirTAC SE80X15 is a double-acting, single-rod ISO 15552 profile cylinder engineered for short-stroke, high-force tasks, delivering a substantial 2513 N push at 0.5 MPa. Its extruded aluminum square barrel omits external tie rods entirely, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along its three integrated grooves.
Because this specific SKU lacks the -S magnet code, it is not equipped from the factory for AirTAC CMSE or DMSE position sensing. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-stop deceleration via a set screw, softening impacts even during brisk 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80X15 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X15 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X15
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X15 Is Used
Injection Mold Ejection
Provides the robust 2513 N push force required to knock dense plastic parts out of injection molding dies within a tight 15 mm stroke.
Staking and Riveting
Applies high axial pressure for deforming metal rivets or staking pins in automated assembly lines without needing a long extension.
Press Brake Clamping
Secures heavy-gauge sheet metal against a press brake backgauge, using its high force and short stroke to maintain rigid positioning.
Is the Airtac SE80 Standard Cylinder SE80X15 the Right Cylinder?
This 80 mm bore generates 2513 N of push force at 0.5 MPa. If your application requires less energy, stepping down to the 63 mm bore yields 1559 N; conversely, scaling up to the 100 mm bore provides 3927 N. As a non-standard 15 mm stroke, this unit is made-to-order to fit tight spatial envelopes.
When sizing for safety, remember that a standard SE cylinder cannot hold a load if air pressure drops or the valve centers—the piston will drift. For positive holding, pair this with a BSE rod lock or external check valve. To match existing tooling, this model is dimensionally interchangeable with other ISO 15552 cylinders, utilizing a PT3/8 port and an M20x1.5 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X15 FAQ
At 0.5 MPa, the SE80X15 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X15 features a standardized ISO 15552 / VDMA 24562 mounting interface, making it dimensionally interchangeable with other ISO 15552 profile cylinders. It uses a PT3/8 port and an M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.