Airtac SE80 Standard Cylinder SE80X160
The AirTAC Airtac SE80 Standard Cylinder SE80X160 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X160
The AirTAC SE80X160 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force and 2268 N of pull force at 0.5 MPa. It features a robust 25 mm piston rod and PT3/8 ports, operating efficiently at speeds between 30-800 mm/s. This bore size achieves a maximum thrust of 513 kgf at 1.0 MPa, making it well-suited for heavy-duty industrial motion tasks.
The extruded aluminum barrel design eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycles. Note that this specific SKU is configured without a sensor magnet, so it does not directly support CMSE or DMSE position switches without modification.
Airtac SE80 Standard Cylinder SE80X160 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X160 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X160
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X160 Is Used
Press Brake Tooling
Provides the 2513 N push force at 0.5 MPa required to actuate heavy lower clamps and secure upper tooling assemblies during sheet metal bending operations.
Pallet Diverters
Utilizes the 160 mm stroke to push loaded pallets weighing several hundred kilograms off a main roller conveyor line onto a branching gravity lane.
Heavy Case Sealers
Drives the folding and sealing mechanism on automated corrugated box lines, relying on the adjustable air cushion to soften the stroke end at high cycle rates.
Is the Airtac SE80 Standard Cylinder SE80X160 the Right Cylinder?
Selecting the SE80X160 is appropriate when your application requires substantial thrust between the 63 mm bore (which provides 1559 N push at 0.5 MPa) and the 100 mm bore (which provides 3927 N push at 0.5 MPa). This 80 mm cylinder effectively bridges that power gap, offering 3518 N of push force at 0.7 MPa. Because it adheres strictly to ISO 15552 mounting dimensions, it serves as a direct, drop-in dimensional replacement for other ISO 15552 profile cylinders, sharing standard mounting accessories like FA or FB flanges.
Keep in mind that a standard double-acting cylinder relies on continuous air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift and cannot hold a load. For tasks requiring true position holding, you would need to step up to a BSE variant equipped with a rod lock. At 160 mm stroke, side-load stress on the rod bearing remains moderate, but ensuring proper alignment is still critical for maximizing seal life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X160 FAQ
The SE80X160 features a PT3/8 port and a 25 mm rod. At 0.5 MPa it generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa the push force increases to 3518 N, and it reaches a maximum push capacity of 513 kgf at 1.0 MPa.
It is dimensionally interchangeable with any ISO 15552 profile cylinder, allowing you to reuse existing mounting hardware. However, it is a standard double-acting cylinder, meaning it will drift and cannot hold a load if air pressure is lost; a BSE rod lock variant is required for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.