Airtac SE80 Standard Cylinder SE80X1600SH
The AirTAC Airtac SE80 Standard Cylinder SE80X1600SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1600SH
The AirTAC SE80X1600SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding extended-reach automation. Delivering a robust 2513 N push force at 0.5 MPa, it features an 80 mm bore and a 1600 mm stroke that is manufactured to order beyond the standard 1500 mm maximum. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along three integrated grooves.
Equipped with a Viton (FKM) seal, this unit reliably operates in environments up to 150 C, far exceeding standard NBR temperature limits. The built-in magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position switches for precise end-of-stroke verification. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration, absorbing kinetic energy smoothly rather than relying on fixed rubber bumpers.
Airtac SE80 Standard Cylinder SE80X1600SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1600SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1600SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1600SH Is Used
Automotive Skid Conveyor Transfer
Pushes heavy automotive skids between assembly lines using 2513 N of thrust at 0.5 MPa, while the 1600 mm stroke accommodates wide conveyor offsets.
Injection Mold Extraction
Reaches deep into high-temperature injection molding machines to extract parts, leveraging the FKM seal rated for 150 C and the extended 1600 mm reach.
Palletizer Pusher Arm
Transfers heavy palletized goods across sorting zones, relying on the no-tie-rod profile barrel for flush mounting and the DMSE electronic sensor for precise positioning.
Is the Airtac SE80 Standard Cylinder SE80X1600SH the Right Cylinder?
Selecting this 80 mm bore provides 2513 N of thrust at 0.5 MPa. If your payload is lighter, stepping down to the 63 mm bore yields 1559 N of push; conversely, upgrading to the 100 mm bore provides 3927 N for heavier loads. Because the 1600 mm stroke exceeds the 1500 mm standard catalog maximum, this cylinder is classified as non-standard and produced as a made-to-order item. The PT3/8 port and M20x1.5 rod thread secure high flow and robust mechanical coupling.
At 1600 mm, the unsupported rod mass introduces significant bending moments and side-loading risks to the front bearing. An external guide mechanism is mandatory to prevent premature seal wear and rod deformation. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the application must hold a vertical load without live air pressure, integrate an external pilot-operated check valve or select a BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1600SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X1600SH is dimensionally interchangeable with any standard ISO 15552 profile cylinder, sharing identical mounting and rod interface dimensions. It is a made-to-order unit due to the 1600 mm non-standard stroke, and the FKM seal allows operation up to 150 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1600SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.