Airtac SE80 Standard Cylinder SE80X1800S
The AirTAC Airtac SE80 Standard Cylinder SE80X1800S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1800 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1800S
The AirTAC SE80X1800S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. It features an 80 mm bore that generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. Designed with a square extruded aluminum barrel, this unit eliminates external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush within tight machinery frames.
This specific configuration includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Because the 1800 mm stroke exceeds the standard 1500 mm maximum, it is produced as a made-to-order assembly. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, protecting long-travel payloads from harsh impacts.
Airtac SE80 Standard Cylinder SE80X1800S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1800S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1800 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1800S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1800S Is Used
Extrusion Press Handling
Drives the long-travel carriage on an aluminum extrusion press, utilizing the 2513 N push force at 0.5 MPa to extract heavy profiles from the die.
Palletizer Transfer Arm
Actuates a 1800 mm transfer arm in an end-of-line palletizer, relying on the adjustable cushioning to smoothly decelerate heavy pallet loads.
CNC Tool Magazine
Shifts a multi-tier tool magazine rack along an 1800 mm axis, using the -S magnet to trigger DMSE electronic sensors for precise rack positioning.
Is the Airtac SE80 Standard Cylinder SE80X1800S the Right Cylinder?
Stepping down to the 63 mm bore reduces the push output to 1559 N at 0.5 MPa, while moving up to the 100 mm bore increases it to 3927 N. If your application requires holding a load vertically without live air pressure, note that a standard SE cylinder will drift; you should evaluate the BSE rod-lock variant or an external pilot-operated check valve. To replace an existing unit, verify the 80 mm bore, 1800 mm stroke, PT3/8 port, and the -S magnet requirement. For a stroke of 1800 mm, the unsupported piston rod is highly susceptible to bending under side loads; always pair this cylinder with an external linear guide to prevent premature rod-bearing failure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1800S FAQ
The SE80X1800S delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa operating pressure.
Yes, the SE80X1800S is dimensionally interchangeable per ISO 15552 standards, allowing it to use shared mounting hardware and replace other ISO 15552 profile cylinders. Note that the 1800 mm stroke is non-standard and made-to-order, and the PT3/8 port must match your existing air supply.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.