Airtac SE80 Standard Cylinder SE80X200SH
The AirTAC Airtac SE80 Standard Cylinder SE80X200SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X200SH
The AirTAC SE80X200SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 2513 N of push force and 2268 N of pull force at 0.5 MPa, scaling to 3518 N push at 0.7 MPa. Equipped with a Viton (FKM) seal, this unit reliably operates in temperatures up to 150 C, making it ideal for high-heat industrial applications.
Built to VDMA 24562 standards, its extruded aluminum barrel omits external tie rods for a compact, corrosion-resistant profile that mounts flush. The integrated -S magnet enables precise tracking with CMSE reed or DMSE electronic sensors, while field-adjustable air cushions at both ends allow you to fine-tune deceleration and soften hard end stops at speed.
Airtac SE80 Standard Cylinder SE80X200SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X200SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X200SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X200SH Is Used
Injection Mold Extraction
Withstands high ambient press heat via its FKM seal and provides 2513 N of push force to reliably eject dense plastic parts from molds.
Heat Shrink Packaging
Survives direct proximity to shrink-tunnels at 150 C while driving 200 mm strokes to seal and pressurize heavy film rolls.
Metal Stamping Ejection
Delivers 3518 N of extend force at 0.7 MPa to eject stamped metal components, utilizing adjustable cushions to brake the heavy payload smoothly.
Is the Airtac SE80 Standard Cylinder SE80X200SH the Right Cylinder?
If your application requires less force, the 63 mm bore offers 1559 N push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N. This 80 mm model features a PT3/8 port, a 25 mm rod, and a 200 mm stroke. Because it is a double-acting cylinder, it cannot hold a load if air pressure is lost; for position holding, consider a BSE rod lock variant. At 200 mm of travel, side-load stress on the rod bearing is minimal, but an external guide is recommended for heavy lateral loads. Being dimensionally interchangeable per ISO 15552, it serves as a drop-in replacement for other ISO 15552 cylinders without altering mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X200SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum push capacity is 513 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting interface, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. The built-in -S magnet is fully compatible with AirTAC CMSE reed switches and DMSE electronic sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.