verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80X230

The AirTAC SE80 Standard Cylinder SE80X230 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke230 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$141.40 $148.90Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE80 Standard Cylinder SE80X230

The AirTAC SE80X230 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force at 0.5 MPa and up to 513 kgf at 1.0 MPa. Its extruded aluminum barrel lacks external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly against machine frames while protecting internal mechanics from shop debris.

This 80 mm bore unit features a Ø25 mm piston rod and field-adjustable pneumatic cushioning at both ends, allowing technicians to dial out harsh end-of-stroke impacts during high-speed 30-800 mm/s cycling. Because this specific SKU lacks the -S magnet option, it does not support AirTAC CMSE or DMSE position sensors without modification.

Airtac SE80 Standard Cylinder SE80X230 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80X230
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke230 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80X230

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×230Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80X230 Is Used

packaging

Palletizer Case Pusher

Uses the 2513 N push force at 0.5 MPa to index filled corrugated cartons onto exit conveyors without crushing the side walls.

straighten

Press Brake Material Stop

Deploys the 230 mm stroke to position heavy-gauge sheet metal backstops precisely during large industrial press brake forming.

conveyor_belt

Bottling Line Diverter

Leverages the 30-800 mm/s speed range and 36 mm adjustable cushion to rapidly route glass containers between packaging lanes smoothly.

Is the Airtac SE80 Standard Cylinder SE80X230 the Right Cylinder?

Stepping down from this 80 mm bore, the 63 mm variant offers 1559 N push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N. If your mechanism must hold a vertical load or resist drift when air pressure is exhausted or a valve is centered, note that a standard SE cylinder will drift; you should specify a BSE rod-lock variant or an external pilot-operated check valve for secure positioning.

With a 230 mm stroke, the unsupported rod length increases bending moments on the front bearing during heavy lateral loads. Implement an external guide rail to prevent premature wear and stick-slip cycling. As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement matching the 80 mm bore, 230 mm stroke, PT3/8 port, and standard mounting interface.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80X230 FAQ

The SE80X230 generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It features a PT3/8 port, a Ø25 mm rod, and an M20x1.5 rod-end thread.

Yes, it is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 cylinders using standard mounting hardware. However, because this specific SKU lacks the -S magnet, it cannot support AirTAC CMSE or DMSE sensors without factory modification.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80X230

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE80X230 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.