verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ100X150-30

The AirTAC SEJ Adjustable Cylinder SEJ100X150-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø100mm unit covers an effective stroke of 120–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ100 mm
  • Nominal stroke150 mm
  • Adjust window30 mm
  • Effective stroke120–150 mm
  • Port sizePT1/2
  • CushionAdjustable, 36 mm
$205.41 $212.91Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ100 stroke, mounting and version on one page All SEJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ100X150-30

The AirTAC SEJ100X150-30 is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window. You can dial the retract end from 120 mm up to 150 mm to perfectly match a mechanical stop. Because a rod exits both ends, the annulus area is symmetrical, yielding equal force in both directions at 3681 N each way at 0.5 MPa.

This extruded aluminum barrel unit features field-adjustable air cushions at both ends to manage kinetic energy. It uses a PT1/2 port and a Ø25 mm rod with an M20x1.5 thread. This specific SKU lacks a magnet, so it cannot host CMSE or DMSE position sensors without modification.

Airtac SEJ Adjustable Cylinder SEJ100X150-30 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ100X150-30
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ100 mm
Nominal stroke150 mm
Adjustment window30 mm (120–150 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressureForce (both directions)
0.5 MPa3682 N
0.7 MPa5154 N
Max (@1.0 MPa)751 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ100X150-30

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
100Bore size in mm.
×150Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ100X150-30 Is Used

precision_manufacturing

Press Brake Stop Fingers

Dial the retract stroke 120-150 mm to set exact backgauge distances for varying sheet metal flange heights on a press brake.

straighten

Bending Die Positioning

Leverage the 5153 N both-way force and adjustable end-stop to precisely strike and retract a forming die without reprogramming a PLC.

swap_horiz

Pallet Changeover Arms

Fine-tune the mechanical stroke during machine commissioning to match varying pallet widths on an automated transfer line.

Is the Airtac SEJ Adjustable Cylinder SEJ100X150-30 the Right Cylinder?

Verify the 30 mm adjustment window covers your required 120-150 mm end-position range. If you need less force, the adjacent 80 mm bore provides 2268 N at 0.5 MPa both ways; if you need more, stepping up to the 125 mm bore yields 5734 N at 0.5 MPa. If your position never changes after commissioning, a fixed-stroke SED is sufficient.

This cylinder does not hold position on air loss; the adjustable cushion only decelerates near stroke end, so use an external rod lock for fail-safe holding. For ISO 15552 replacement matching, confirm the 100 mm bore, 150 mm nominal stroke, 30 mm window, PT1/2 port, and your required mounting from the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 set.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ100X150-30 FAQ

A stop screw on the back rod lets you mechanically adjust the retract stroke over a 30 mm window. The effective stroke range is 120 mm to 150 mm. Lock the screw after setting your exact end position.

Because the rod exits both ends, force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ100X150-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ100X150-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.