
The AirTAC SEJ Adjustable Cylinder SEJ100X150-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø100mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X150-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is equal in both directions at 3681 N (0.5 MPa) and 5153 N (0.7 MPa). The retract end uses a mechanical stop screw on the back rod to dial the stroke down from 150 mm to an effective 100 mm minimum.
This extruded aluminum profile cylinder features field-adjustable air cushions at both ends to manage deceleration near the stroke limits. It operates at 30-800 mm/s with a PT1/2 port and a Ø25 mm rod (M20x1.5 thread). This SKU ships without a magnet, so it lacks internal position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X150-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100-150 mm retract position to match varied sheet metal flange depths, using the 5153 N both-way force to push the gauge stop reliably.
Adjust the mechanical stop on the back rod during format size changes to hit different carton folding heights without swapping out cylinder hardware.
Fine-tune the electrode approach over the 50 mm window during commissioning to find the exact contact point on new automotive fixtures.
Verify your end-position tolerance fits the 50 mm adjustment window, giving an effective stroke range of 100-150 mm. If you need less thrust, the adjacent bore down is 80 mm (2268 N at 0.5 MPa); if you need more force, step up to 125 mm (5734 N at 0.5 MPa). If the exact 150 mm position is permanently fixed and never needs commissioning fine-tune, a standard SED fixed-stroke cylinder is sufficient.
For fail-safe load holding on air loss, note that the adjustable cushion and back-rod stop screw only set the mechanical end and decelerate the piston; they do not lock the rod. Use an external rod lock or BSED for holding. When replacing an ISO 15552 unit, match the 100 mm bore, 150 mm stroke, 50 mm window, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
The retract end has a stop screw on the back rod that lets you mechanically shorten the stroke. The effective stroke range is 100-150 mm. You dial the end position during setup and lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.