
The AirTAC SEJ Adjustable Cylinder SEJ100X200-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø100mm unit covers an effective stroke of 190–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ100X200-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas and equal force in both directions—delivering 3681 N each way at 0.5 MPa. The integrated magnet supports CMSE reed and DMSE electronic sensors for precise position feedback.
You can dial the retract end-position over a 10mm range, giving an effective stroke of 190-200mm. A mechanical stop screw on the back rod sets the exact end point, which you lock down after fine-tuning the machine. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the 25mm rod near stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ100X200-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 10 mm (190–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 190-200mm clamping depth on a stamping press, using the 5153 N both-way force to secure heavy sheet metal blanks.
Adjust the retract stop by up to 10mm when switching carton sizes, ensuring precise folding arm positioning without changing hardware.
Set variable end stops for converging conveyor belts in a lumber mill, leveraging the 25mm rod to resist side loading and guide thick planks.
Confirm the 10mm adjustment window covers your required end-position variance. If your application needs less force, the 80mm bore provides 2268 N at 0.5 MPa; if you need more, the 125mm bore yields 5734 N. If you require a fixed end-position without field adjustment, the SED double-rod cylinder is a simpler choice. For direct replacements, match the 100mm bore, 200mm stroke, PT1/2 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; use an external rod lock for fail-safe holding.
Quick checklist
The retract stroke is adjustable over a 10mm window, allowing you to set the effective stroke anywhere from 190mm to 200mm. A stop screw on the back rod mechanically sets this position, which you lock after fine-tuning.
Because the rod exits both ends, force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.