verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X100-20S

The AirTAC SEJ Adjustable Cylinder SEJ125X100-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 80–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke100 mm
  • Adjust window20 mm
  • Effective stroke80–100 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$298.46 $305.96Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X100-20S

The AirTAC SEJ125X100-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable retract stroke. The -20 suffix indicates a 20 mm stop-screw window on the back rod, letting you dial the retract stroke anywhere from 80 to 100 mm to hit a precise machine end-position.

Because the rear rod extends through the back cap, you can mount a cam or flag for position sensing. This unit includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel carries no external tie rods, and adjustable air cushions at both ends decelerate the 30-500 mm/s travel speed over a 40 mm cushion length.

Airtac SEJ Adjustable Cylinder SEJ125X100-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X100-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke100 mm
Adjustment window20 mm (80–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X100-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×100Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X100-20S Is Used

precision_manufacturing

Heavy Press Die Changeover

Dial the 20 mm retract window to match varying die heights during production changeovers, using the 5734 N both-way force to shift heavy dies precisely.

straighten

Thick Plate Bending Stop

Set the 80-100 mm mechanical stop to position thick metal plates accurately before bending, relying on equal push and pull forces to prevent workpiece skewing.

sync_alt

Palletizer End-of-Arm Tuning

Fine-tune the retract end during robotic palletizer commissioning to perfect gripper hand-off positions without re-machining hard stops.

Is the Airtac SEJ Adjustable Cylinder SEJ125X100-20S the Right Cylinder?

Confirm the 20 mm adjustment window safely covers your 80-100 mm end-position range before ordering. If your application needs less force, stepping down to the 100 mm bore yields 3681 N at 0.5 MPa both ways; if you require more, there is no larger SEJ bore, so you would need dual cylinders. If the stroke never varies, a fixed-stroke SED is sufficient. For fail-safe load holding on air loss, note that the stop screw and cushions are not a brake; use an external rod lock. Match ISO 15552 replacements by bore, stroke, PT1/2 port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X100-20S FAQ

The 20 mm stop-screw window on the back rod lets you mechanically adjust the retract stroke from 80 mm up to the nominal 100 mm. You lock the stop screw after setting the exact end-position on the machine.

Because the rod exits both ends, the force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X100-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X100-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.