
The AirTAC SEJ Adjustable Cylinder SEJ125X175-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 125–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X175-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly balanced at 5734 N each way at 0.5 MPa. You can mechanically dial the retract end from 125 mm up to the 175 mm nominal stroke, letting you fine-tune the exact end position directly on the machine without swapping hardware.
This extruded aluminum barrel unit includes a -S magnet for CMSE reed or DMSE electronic sensors. It uses field-adjustable air cushions at both ends to decelerate the heavy 125 mm bore payload near stroke end, and the back-rod stop screw can be locked securely once your target position is set.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X175-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 50 mm (125–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to match varying die heights during stamping press setups, utilizing the 8028 N both-way force to shift heavy lower dies precisely.
Fine-tune the stop distance on automated pallet conveyors to accommodate different pallet footprints without reprogramming the machine controller.
Adjust the end-of-stroke position on the fly during robotic welding cell commissioning to perfectly align heavy fixtures against the weld seam.
Confirm the 50 mm adjustment window safely covers your required end-position variance, providing an effective stroke range of 125-175 mm. If you need less force, the next bore down is 100 mm providing 3681 N both-way at 0.5 MPa; if you need more, step up to the 125 mm bore's maximum 1169 kgf at 1.0 MPa. If your stroke never varies, a fixed-stroke SED cylinder is sufficient. For fail-safe position holding on air loss, this plain cylinder cannot lock—use an external rod lock or BSED.
When matching this ISO 15552 cylinder for a retrofit, verify the PT1/2 port, M27x2 rod thread, and your specific mounting choice from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 175 mm, ensure external guides support any heavy lateral loads to prevent rod binding.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 50 mm window. Your effective stroke range is 125 mm to 175 mm. You dial in the exact end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, the force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.