
The AirTAC SEJ Adjustable Cylinder SEJ125X200-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø125mm unit covers an effective stroke of 125–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X200-75S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas and equal force in both directions at 5734 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 75 mm window, giving an effective stroke range of 125 to 200 mm.
It includes a magnet for CMSE or DMSE sensors and features field-adjustable air cushions at both ends. The PT1/2 port and Ø32 rod handle heavy loads, while the extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X200-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 75 mm (125–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 125 to 200 mm clamping depth on a thick-gauge press brake, using the 5734 N both-way force to hold the material securely.
Fine-tune the ejector stroke during mold swaps, adjusting the retract end mechanically by up to 75 mm to match new part heights without changing hardware.
Set precise mechanical end stops for heavy stamping presses, leveraging the 8028 N both-way force at 0.7 MPa to move heavy tooling consistently.
Confirm the 75 mm adjustment window covers your required end-position range. If you need less than 125 mm of travel, step down to the 100 mm bore, which provides 3681 N both ways at 0.5 MPa. If you need over 200 mm of travel, step up to a longer stroke SEJ125. For fixed-position heavy pushing without fine-tuning, a standard SED cylinder is sufficient. Note that the adjustable cushion decelerates the load near the end of stroke but does not hold position on air loss; use an external rod lock for fail-safe holding. This model is dimensionally interchangeable per ISO 15552 when matching the 125 mm bore, 200 mm stroke, PT1/2 port, and magnet options.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The retract end is mechanically adjustable via a stop screw on the back rod over a 75 mm window. This dials the effective stroke from 125 mm up to the nominal 200 mm. You lock the screw after setting the exact end position.
Because the rod exits both ends, force is identical in both directions. It generates 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.