
The AirTAC SEJ Adjustable Cylinder SEJ125X40-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 30–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X40-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding an identical annulus area for equal force and speed in both directions—delivering 5734 N each way at 0.5 MPa. You can dial the retract stroke from 30 to 40 mm to perfectly match a mechanical stop.
This cylinder includes a magnet for position sensing and uses an extruded aluminum barrel without external tie rods. A stop screw on the back rod lets you fine-tune the end position during commissioning; lock it down once set. The field-adjustable air cushion at both ends decelerates the heavy 125 mm piston near stroke end, but this is not a fail-safe lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X40-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 10 mm (30–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30 to 40 mm retract position to set precise die clearance during stamping commissioning, utilizing the 5734 N both-way force to hold heavy tooling.
Fine-tune the mechanical stop on a heavy-duty conveyor handling bulk materials, using the 10 mm window to match varying product lengths without changing hardware.
Adjust the end position during setup of a high-force clamping fixture, relying on the equal push and pull forces to test part fit before locking the stop screw.
Confirm the 10 mm adjustment window covers your positioning needs, allowing a 30 to 40 mm effective stroke range. If your application requires less force, stepping down to the 100 mm bore provides 3681 N at 0.5 MPa; if you need more, note this 125 mm bore is the largest standard size, yielding 8028 N at 0.7 MPa. If the end position never changes, a fixed-stroke SED cylinder is a simpler choice. For drop prevention on air loss, use an external rod lock or BSED. As an ISO 15552 cylinder, it dimensionally matches standard bore, stroke, and PT1/2 port specifications.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The 10 mm adjustment window lets you mechanically dial the retract stroke from an effective 30 mm up to the nominal 40 mm. You set the exact end position via a stop screw on the back rod, then lock it in place.
Because the rod exits both ends, force is identical in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.