
The AirTAC SEJ Adjustable Cylinder SEJ125X75-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 25–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X75-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. You can mechanically dial the retract end from 25mm up to 75mm via a stop screw on the back rod, letting you fine-tune the exact end position during machine commissioning without swapping hardware. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions.
The integrated -S magnet supports CMSE reed and DMSE electronic sensors for precise position detection, while the PT1/2 ports and M27x2 rod thread handle high-flow pneumatic demands.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X75-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 50 mm (25–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 25-75mm clamping depth on heavy metal stamping presses, utilizing the 5734N both-way force to securely hold and form thick steel workpieces.
Adjust the retract stop on large material bending machines to accommodate different part heights, relying on the robust 32mm double-rod to resist side loading.
Fine-tune the end-of-stroke position during automated line changeovers, using the mechanical back-rod screw to match varying product dimensions without reprogramming controls.
Verify the 50mm adjustment window covers your required positioning range; if your application needs less than 25mm of retract travel, consider a smaller standard stroke. If 5734 N at 0.5 MPa is excessive, stepping down to the 100mm bore yields 3681 N both ways, whereas this 125mm unit maxes out at 1169 kgf at 1.0 MPa. For fixed-position tasks without the need for machine-side dialing, the standard SED double-rod cylinder offers a simpler setup.
When replacing an ISO 15552 cylinder, match the 125mm bore, 75mm nominal stroke, PT1/2 port, and your specific mounting choice from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The 50mm adjustment window allows you to mechanically set the effective retract stroke anywhere from 25mm up to the full 75mm by turning the stop screw on the back rod, which you then lock in place.
Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.