verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X160-40S

The AirTAC SEJ Adjustable Cylinder SEJ32X160-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø32mm unit covers an effective stroke of 120–160mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke160 mm
  • Adjust window40 mm
  • Effective stroke120–160 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$78.39 $85.89Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X160-40S

The AirTAC SEJ32X160-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable retract window. By turning the stop screw on the back rod, you set the effective stroke anywhere from 120mm up to 160mm, allowing precise on-machine end-position tuning without hardware swaps.

This extruded-aluminum ISO 15552 cylinder includes a built-in magnet for position sensing and field-adjustable air cushions at both ends to decelerate the load near stroke end. The dual-rod design naturally resists rotation and handles minor lateral loads better than a single-rod unit, though external guides are recommended for heavy offsets.

Airtac SEJ Adjustable Cylinder SEJ32X160-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X160-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke160 mm
Adjustment window40 mm (120–160 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X160-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×160Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X160-40S Is Used

tune

Press Stroke Calibration

Dial in the exact 120-160mm clamping travel on a small pneumatic press, using the 345 N both-way force to seat light bearings without over-traveling.

swap_horiz

Multi-Height Changeover

Adjust the retract stop on the fly to accommodate different part heights on a packaging conveyor, ensuring precise positioning without swapping cylinder hardware.

precision_manufacturing

Pick-and-Place Trial

Fine-tune the lower pick position during machine commissioning, relying on the double-rod design to resist rotation and maintain gripper alignment.

Is the Airtac SEJ Adjustable Cylinder SEJ32X160-40S the Right Cylinder?

Verify the 40mm adjustment window covers your required positioning range; if you need less than 120mm of travel, consider a smaller standard stroke. If your application demands more force than the 345 N (@0.5 MPa) provided by this 32mm bore, step up to the 40mm bore for 528 N, or if you can sacrifice thrust, step down to a smaller frame. If your end-stop never changes after commissioning, a fixed-stroke SED cylinder is a simpler alternative.

Remember that the adjustable cushion and mechanical stop screw decelerate the load and set the end position, but a plain SEJ does not hold position on air loss—for fail-safe holding, specify a BSED or an external rod lock. When replacing an ISO 15552 cylinder, match the 32mm bore, 160mm nominal stroke, 40mm window, PT1/8 port, and your required mounting bracket (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X160-40S FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 40mm. The effective stroke range is 120mm to 160mm, which you set and lock at the machine without changing the cylinder hardware.

Because it is a double-rod cylinder, the force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X160-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X160-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.