verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X250-30S

The AirTAC SEJ Adjustable Cylinder SEJ32X250-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 220–250mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke250 mm
  • Adjust window30 mm
  • Effective stroke220–250 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$86.76 $94.26Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X250-30S

The AirTAC SEJ32X250-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. This allows you to dial in the retract end position, yielding an effective stroke range of 220 to 250 mm without swapping hardware. A rod exits both ends, ensuring equal force and speed in both directions—delivering 345 N each way at 0.5 MPa.

The rear rod houses a mechanical stop screw you lock after setting the exact end position. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the load near stroke end.

Airtac SEJ Adjustable Cylinder SEJ32X250-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X250-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke250 mm
Adjustment window30 mm (220–250 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X250-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×250Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X250-30S Is Used

precision_manufacturing

PCB Drill Depth Calibration

Dial the 30 mm retract window to set precise Z-axis drill depth on printed circuit boards, utilizing the 345 N both-way force to lift the spindle cleanly without rebound.

swap_horiz

Packaging Changeover

Adjust the effective stroke from 220 to 250 mm when switching carton sizes on a packaging line, using the equal double-rod force to push flaps consistently.

tune

Dispenser Nozzle Positioning

Fine-tune the retract stop screw during commissioning to hit the exact fluid dispensing height, locking the rear rod once the 483 N at 0.7 MPa meets the required contact pressure.

Is the Airtac SEJ Adjustable Cylinder SEJ32X250-30S the Right Cylinder?

Verify the 30 mm adjustment window covers your required positioning range. If you need less force, the next bore down does not exist in this series, so step down to an external guide. If applying greater thrust, the next bore up is the 40 mm version, providing 528 N both ways at 0.5 MPa. If your end position is fixed and never changes, a standard SED double-rod cylinder provides sufficient function without the adjustment hardware.

This cylinder does not hold position on air loss; the stop screw and air cushions only set the mechanical end and decelerate the load, so specify an external rod lock for fail-safe holding. Because the 250 mm stroke exceeds 300 mm, ensure external guides support the rod to manage side loads. To match this ISO 15552 cylinder for a replacement, confirm the 32 mm bore, 220-250 mm effective stroke, PT1/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X250-30S FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 30 mm. For a 250 mm nominal stroke, the effective stroke range is 220 to 250 mm. You lock the screw after setting the exact end position on the machine.

Because it is a double-rod cylinder, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X250-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X250-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.