
The AirTAC SEJ Adjustable Cylinder SEJ32X60-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 30–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X60-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 345 N each way at 0.5 MPa. You can dial the retract end from 30 mm up to the 60 mm nominal stroke, allowing precise on-machine end-position tuning without swapping hardware.
This 32 mm bore unit includes a magnet for CMSE or DMSE sensors and uses a PT1/8 port. A stop screw on the back rod mechanically sets the stroke, which you lock after positioning. Adjustable air cushions at both ends decelerate the load near the stroke end, while the extruded aluminum barrel ensures ISO 15552 dimensional interchangeability.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X60-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 30 mm (30–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm window to fine-tune the exact dispensing position on a packaging line, utilizing the equal 345 N both-way force for consistent retraction.
Quickly adjust the effective stroke from 30 to 60 mm to accommodate varying product heights on a conveyor without changing cylinder hardware.
Use the back-rod stop screw during trial positioning of a testing fixture, locking the end position precisely once the optimal travel is found.
Confirm the 30 mm adjustment window covers your required positioning range. If you need less force, stepping down is not an option as 32 mm is the smallest bore. If your application requires more power, step up to the 40 mm bore, which provides 528 N both ways at 0.5 MPa. For setups needing no end-position fine-tuning, a fixed-stroke SED cylinder is sufficient.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 60 mm stroke, 30 mm window, PT1/8 port, and magnet option. The plain SEJ32X60-30S does not hold position on air loss; the stop screw and cushions only set the mechanical end and decelerate. For fail-safe holding, use an external rod lock. For strokes of 60 mm, side loads are minimal, but external guides are recommended if pushing heavy loads.
Quick checklist
The retract stroke is adjustable over a 30 mm window. You can dial the effective stroke down from the 60 mm nominal stroke to 30 mm, allowing precise on-machine end-position tuning.
Because a rod exits both ends, force is equal in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.